Witam wszystkich
Jestem poczontkujoncym programistą. Mam problem z dopisaniem do kodu 3 potencjometrów. SCIEMNIANIE_POJEDYNCZE_STEP, brightness, delayTime.
W sumie na tym etapie nauki zaadaptowanie tych potencjometrów to jakaś czarna magia tym bardziej ze kod jest ściągnięty z internetu.
Dlatego to proszę o pomoc a projekt jest dość pilny.
Jestem poczontkujoncym programistą. Mam problem z dopisaniem do kodu 3 potencjometrów. SCIEMNIANIE_POJEDYNCZE_STEP, brightness, delayTime.
W sumie na tym etapie nauki zaadaptowanie tych potencjometrów to jakaś czarna magia tym bardziej ze kod jest ściągnięty z internetu.
Dlatego to proszę o pomoc a projekt jest dość pilny.
Kod:
#include <Tlc5940.h>
#include "ClickButton.h"
const int downButtonPin = 8;
const int upButtonPin = 6;
const int midButtonPin = 7;
int ledCount = 18; //liczba aktywnych wyjść (taśm led)
int brightness = 4095; //maksymalna jasność
int delayTime = 1;
int midStep = 13;
int outs[] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17}; //wyjścia do których podpinane są taśmy
int outState[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
// Nr. of buttons in the array
const int buttons = 3;
ClickButton button[3] = {
ClickButton (downButtonPin, LOW, CLICKBTN_PULLUP),
ClickButton (upButtonPin, LOW, CLICKBTN_PULLUP),
ClickButton (midButtonPin, LOW, CLICKBTN_PULLUP),
};
int LEDfunction[buttons] = { 0, 0, 0 };
const int DOWN_BUTTON = 0;
const int UP_BUTTON = 1;
const int MID_BUTTON = 2;
const int STAN_WYLACZONY = 0;
const int STAN_ROZJASNIANIE_OD_DOLU = 1;
const int STAN_SCIEMNIANIE_OD_DOLU = 2;
const int STAN_ROZJASNIANIE_OD_GORY = 3;
const int STAN_SCIEMNIANIE_OD_GORY = 4;
const int STAN_ROZJASNIANIE_OD_SRODKA = 5;
const int STAN_SCIEMNIANIE_OD_SRODKA = 6;
const int STAN_ROZJASNIANIE_CALOSCI = 7;
const int STAN_SCIEMNIANIE_CALOSCI = 8;
const int STAN_WLACZONY = 9;
const int SCIEMNIANIE_POJEDYNCZE_STEP = 5;
const int SCIEMNIANIE_CALOSCI_STEP = 10;
const int ROZJASNIANIE_POJEDYNCZE_STEP = 25;
const int ROZJASNIANIE_CALOSCI_STEP = 10;
int STAN = STAN_WYLACZONY;
void setup()
{
Tlc.init();
for (int i=0; i<buttons; i++)
{
// Setup button timers (all in milliseconds / ms)
// (These are default if not set, but changeable for convenience)
button[i].debounceTime = 20; // Debounce timer in ms
button[i].multiclickTime = 250; // Time limit for multi clicks
button[i].longClickTime = 800; // Time until long clicks register
}
updateLed();
}
void loop()
{
for (int i=0; i<buttons; i++) {
// Update state of all buitton
button[i].Update();
// Save click codes in LEDfunction, as clicks counts are reset at next Update()
if (button[i].clicks != 0) LEDfunction[i] = button[i].clicks;
// Simply toggle LED on single clicks
// (Cant use LEDfunction like the others here,
// as it would toggle on and off all the time)
if(button[i].clicks == 1) {
wlaczPianino(i);
}
// slow blink (must hold down button. 1 second long blinks)
if(LEDfunction[i] == -1) {
ustawStanStaly(i);
LEDfunction[i] = 0;
}
}
updateCircuitState();
updateLed();
delay(delayTime);
}
void updateLed() {
for (byte diode = 0; diode<ledCount;diode++) {
Tlc.set(outs[diode], brightness-outState[diode]);
}
Tlc.update();
}
void updateCircuitState() {
if (STAN == STAN_ROZJASNIANIE_OD_DOLU) {
rozjasnianieOdDolu();
}
if (STAN == STAN_SCIEMNIANIE_OD_DOLU) {
sciemnianieOdDolu();
}
if (STAN == STAN_ROZJASNIANIE_OD_GORY) {
rozjasnianieOdGory();
}
if (STAN == STAN_SCIEMNIANIE_OD_GORY) {
sciemnianieOdGory();
}
if (STAN == STAN_ROZJASNIANIE_CALOSCI) {
rozjasnianieCalosci();
}
if (STAN == STAN_SCIEMNIANIE_CALOSCI) {
sciemnianieCalosci();
}
if (STAN == STAN_ROZJASNIANIE_OD_SRODKA) {
rozjasnianieOdSrodka();
}
if (STAN == STAN_SCIEMNIANIE_OD_SRODKA) {
sciemnianieOdSrodka();
}
}
void rozjasnianieOdSrodka() {
bool changed = false;
for (int diode = midStep; diode<ledCount;diode++) {
if (outState[diode] < brightness) {
int newState = outState[diode];
newState = newState + ROZJASNIANIE_POJEDYNCZE_STEP;
if (newState > brightness) {
newState = brightness;
}
outState[diode] = newState;
changed = true;
break;
}
}
for (int diode = midStep-1; diode>=0;diode--) {
if (outState[diode] < brightness) {
int newState = outState[diode];
newState = newState + ROZJASNIANIE_POJEDYNCZE_STEP;
if (newState > brightness) {
newState = brightness;
}
outState[diode] = newState;
changed = true;
break;
}
}
if (!changed) {
STAN = STAN_SCIEMNIANIE_OD_SRODKA;
}
}
void sciemnianieOdSrodka() {
bool changed = false;
for (int diode = midStep; diode<ledCount;diode++) {
if (outState[diode] > 0) {
int newState = outState[diode];
newState = newState - SCIEMNIANIE_POJEDYNCZE_STEP;
if (newState < 0 ) {
newState = 0;
}
outState[diode] = newState;
changed = true;
break;
}
}
for (int diode = midStep-1; diode>=0;diode--) {
if (outState[diode] > 0) {
int newState = outState[diode];
newState = newState - SCIEMNIANIE_POJEDYNCZE_STEP;
if (newState < 0) {
newState = 0;
}
outState[diode] = newState;
changed = true;
break;
}
}
if (!changed) {
STAN = STAN_WYLACZONY;
}
}
void rozjasnianieCalosci() {
bool changed = false;
for (int diode = 0; diode<ledCount;diode++) {
if (outState[diode] < brightness) {
int newState = outState[diode];
newState = newState + ROZJASNIANIE_CALOSCI_STEP;
if (newState > brightness) {
newState = brightness;
}
outState[diode] = newState;
changed = true;
}
}
if (!changed) {
STAN = STAN_WLACZONY;
}
}
void sciemnianieCalosci() {
bool changed = false;
for (int diode = 0; diode<ledCount;diode++) {
if (outState[diode] > 0) {
int newState = outState[diode];
newState = newState - SCIEMNIANIE_CALOSCI_STEP;
if (newState < 0) {
newState = 0;
}
outState[diode] = newState;
changed = true;
}
}
if (!changed) {
STAN = STAN_WYLACZONY;
}
}
void rozjasnianieOdDolu() {
bool changed = false;
for (int diode = 0; diode<ledCount;diode++) {
if (outState[diode] < brightness) {
int newState = outState[diode];
newState = newState + ROZJASNIANIE_POJEDYNCZE_STEP;
if (newState > brightness) {
newState = brightness;
}
outState[diode] = newState;
changed = true;
break;
}
}
if (!changed) {
STAN = STAN_SCIEMNIANIE_OD_DOLU;
}
}
void sciemnianieOdDolu() {
bool changed = false;
for (int diode = 0; diode<ledCount;diode++) {
if (outState[diode] > 0) {
int newState = outState[diode];
newState = newState - SCIEMNIANIE_POJEDYNCZE_STEP;
if (newState < 0) {
newState = 0;
}
outState[diode] = newState;
changed = true;
break;
}
}
if (!changed) {
STAN = STAN_WYLACZONY;
}
}
void rozjasnianieOdGory() {
bool changed = false;
for (int diode = ledCount-1; diode>=0;diode--) {
if (outState[diode] < brightness) {
int newState = outState[diode];
newState = newState + ROZJASNIANIE_POJEDYNCZE_STEP;
if (newState > brightness) {
newState = brightness;
}
outState[diode] = newState;
changed = true;
break;
}
}
if (!changed) {
STAN = STAN_SCIEMNIANIE_OD_GORY;
}
}
void sciemnianieOdGory() {
bool changed = false;
for (int diode = ledCount-1; diode>=0;diode--) {
if (outState[diode] > 0) {
int newState = outState[diode];
newState = newState - SCIEMNIANIE_POJEDYNCZE_STEP;
if (newState < 0) {
newState = 0;
}
outState[diode] = newState;
changed = true;
break;
}
}
if (!changed) {
STAN = STAN_WYLACZONY;
}
}
void wlaczPianino(int button) {
/*
jesli swiatla byly wlaczone, tylko plynnie wylaczamy
*/
if (STAN == STAN_WLACZONY) {
if (button == DOWN_BUTTON) {
STAN = STAN_SCIEMNIANIE_OD_DOLU;
}
if (button == UP_BUTTON) {
STAN = STAN_SCIEMNIANIE_OD_GORY;
}
if (button == MID_BUTTON) {
STAN = STAN_SCIEMNIANIE_OD_SRODKA;
}
}
/*
jesli swiatla byly wylaczone, wtedy plynnie wlaczamy
*/
if (STAN == STAN_WYLACZONY) {
if (button == DOWN_BUTTON) {
STAN = STAN_ROZJASNIANIE_OD_DOLU;
}
if (button == UP_BUTTON) {
STAN = STAN_ROZJASNIANIE_OD_GORY;
}
if (button == MID_BUTTON) {
STAN = STAN_ROZJASNIANIE_OD_SRODKA;
}
}
}
void ustawStanStaly(int button) {
Serial.print("ustawStanStaly ");
Serial.print(button);
Serial.print(" ");
Serial.println(STAN);
if (
STAN == STAN_WLACZONY ||
STAN == STAN_SCIEMNIANIE_OD_DOLU ||
STAN == STAN_SCIEMNIANIE_OD_GORY ||
STAN == STAN_SCIEMNIANIE_OD_SRODKA
) {
STAN = STAN_SCIEMNIANIE_CALOSCI;
}
if (
STAN == STAN_WYLACZONY ||
STAN == STAN_ROZJASNIANIE_OD_DOLU ||
STAN == STAN_ROZJASNIANIE_OD_GORY ||
STAN == STAN_ROZJASNIANIE_OD_SRODKA
) {
STAN = STAN_ROZJASNIANIE_CALOSCI;
}
}